Bioresonance Therapy, Bioresonance Treatment, Buy Bioresonance Device, Bioresonance Machine, Alternative Therapy, Alternative Medicine, Health Therapy, Biomagnetic Therapy, Beauty Therapy, Beauty Treatment, Mora Therapy Device, Biomag, Bio Mag, Bio-Mag

Physiotherapeutic apparatus for bio-resonance treatment and anti-parasitic correction of the medium «BIO-MAG» / «BIOMEDIS»

ТU 9444-001-87530614-2008

INSTRUCTIONS FOR USAGE

Please, read these instructions carefully before usage!

Content

Delivery set
Function
Principle of operation
Indications for usage
Contra-indications for usage
Side effects (reactions of the body)
Preparation for usage
Method of usage
Recommendations
Security measures guidelines
Technical specifications
Warranties
Organs and diseases

Delivery set

1. Bio-resonance and anti-parasitic therapy apparatus with connection wire
2. Battery holder (elastic support strap for power elements)
3. Three power elements (ААА batteries)
4. Instructions for usage

Function

BIO-MAG (Biomedis) apparatus consists of three devices, incorporated into one case.

1. Endogenous bio-resonance therapy apparatus
2. Exogenous bio-resonance therapy apparatus (Voll, Schmidt, Rife waves)
3. Anti-parasitic correction apparatus (according to Dr. H. Clark method)

1. Endogenous bio-resonance therapy is carried out by electromagnetic oscillations in the frequency range from 0 to 100 MHz, characteristic to the patient, which are taken from the surface of the patient's skin, processed in a special mode and returned. During the therapy process, the patient and the apparatus form a closed loop of adaptive regulation, allowing the body to use its own ability to come to the state of physiological homeostasis.
2. Exogenous bio-resonance therapy allows carrying out electrotherapy for a patient using electro-sinusoidal currents of variable frequencies (from 0.1 to 10000 Hz), according to 826 programs. During this type of therapy, the human brain waves spectrum is used (Voll, Schmidt, and Rife frequencies).
3. Anti-parasitic correction of the medium is carried out via a sinusoidal signal of certain frequency (from 100 to 900 кHz), in compliance with the selected program (out of 224 programs), according to the Dr. H. Clark's method.

The BIO-MAG (Biomedis) apparatus allows harmlessly and effectively treat both acute and chronic diseases, in which etiology and pathogenesis an important role play parasitic, bacterial, viral and fungal infections.

When the rules are observed, the therapy efficiency is over 90%.

This type of therapy could be combined with any other methods of treatment, such as pharmacotherapy, physiotherapy, homeopathy, acupuncture, etc.

The device can be consistently used by multiple users.

Principle of operation

Bio-resonance therapy (BRT) consists in correction of the body's functions through harmonic conversion of resonant electromagnetic oscillations that are typical for a living organism, with the purpose of their synchronization.

New is usage of resonant to the body parameters of electromagnetic influences. The treatment is based on suppression of pathological, and restoration and enhancement of physiological frequency oscillation spectra as well as maintenance of relative synchronization of various wave processes, which constitute the physiological body homeostasis.

The idea of BRT with the help of weak electromagnetic oscillations, inherent in the patient, was first mentioned and scientifically proved by Dr. Franz Morell and electronics engineer Eric Rasche (1977).

There is a relative synchronization of different vibration (wave) processes in normal physiological state of human body; whereas when the vibration harmony is distorted, pathological conditions (diseases) start to develop.

BRT – is a therapy with electromagnetic oscillations, with which the structures of the organism come into resonance. The impact could be on the cellular level as well as on the level of organ, organs' system, and the whole body, as different levels are characterized and controlled by different frequency and wave parameters.

The main idea of bio-resonance usage consists in the fact that in case of correct selection of frequency and type of electromagnetic treatment one could increase normal (physiological) and decrease pathological vibrations in the human body.

Thus, bio-resonance impact could be directed to neutralize pathological and restore physiological vibrations that were distorted in pathological conditions, i.e. to suppress interferences (noise) in the information body-field; without what it is impossible to cure any disease.

Indications for usage

1. Diseases of respiratory organs
2. Viral and microbial infections
3. Blood diseases
4. Senile diseases
5. Depression
6. Raised irritability
7. Vessels diseases
8. Immunodeficiencies
9. Autoimmune diseases
10. Impotence
11. Joints diseases
12. Backbone/spinal diseases
13. Liver diseases
14. Pancreas diseases
15. Cardio-vascular system's diseases
16. CNS diseases, brain functions stimulation
17. Nephritic/kidney diseases
18. Muscular diseases
19. Helminthiases
20. Ophtalmologic/eye diseases
21. Fungoides lesions
22. Headaches
23. Sleep disturbances
24. Locomotive system diseases
25. Digestive system diseases
26. Endocrine diseases
27. Allergic diseases
28. Assistance in deliverance from bad habits

Contra-indications for usage (taking into account the methodical recommendations Nr.2000/74 of the Ministry of Health of the Russian Federation)

• Blood coagulation disorders
• Pregnancy
• Children up to one year age
• Pacemaker implant
• Electric current intolerance
• Epileptic paroxysm, convulsive syndrome
• Central nervous system congenital disorders
• Skin injuries and diseases in places where electrical stimulation is applied
• Acute psychotic excitation or intoxication

Side effects (reactions of the body) to the process of therapy (only for anti-parasitic correction)

Almost all side effects are usually observed only within the first two weeks of BIO-MAG (Biomedis) usage and constitute an individual peculiarity of the organism. There is no need to take any additional medications in this case.

These phenomena are associated with an individual reaction of the body to the wave effects of the device and are indicative of increase in excretory reactions of the contaminated organism.

In some cases, the side effects could appear at a later stage, and the discomfort could persist during one month after you started to use the device.

The most frequent side-effects (reactions of the body):

• diarrhea
• frequent urination;
• skin rashes;
• thirst;
• drowsiness.

Other possible side-effects (reactions of the body):

• ARVI symptoms (headache, runny nose, increased body temperature)
• local skin pigmentation where the contact electrodes are placed (under wristlet)
• burning under the skin and in different organs
• joint pains and headaches
• sleep and wakefulness regime disorder
• nose discharge
• exacerbation of existing diseases

Preparation for usage

1. - START button (to start the program)
2. - STOP button (to turn off the program)
3. - Button to move the indicator scale ("movement" button)
4. - Button to select figures in a scale ("selection" button)

1. Put the batteries into the battery holder (elastic support strap for power elements).
2. Turn the device on, and check its operability.
3. Put the plug in the contact socket of the device's body (the light-emitting diode display/LED indicator will light up).
4. The device is ready for usage.

Method of usage

Endogenous bio-resonance therapy:

1. Put the device on the left wrist and the elastic support strap for power elements - on the right one, over vascular bundle (fascicle), on the pulse. The electrodes should be adjusted comparatively tight. If necessary, adjust the length of the straps.
2. Using the buttons "movement" (3) and "selection" (4), enter number 2000.
3. Press the start button (1). The display will show a moving stripe at the middle of the indicator, which corresponds to the beginning of the treatment process.
4. In 10 minutes, when generation of the treatment signal will stop, the display will show figure 2000, and there will be an audible signal, turn off the device.
5. Remove the device and the elastic support strap from your wrist (if necessary).
6. Take a break for 20 minutes.
7. After the break, turn the device on again, and follow entries 1-4. The second cycle will start. After the second cycle is over, follow entry 6.
8. Make the second break for 20 minutes.
9. Turn the device on and follow entries 1-4. The third cycle will start. After the third cycle is over, follow entry 6.
10. Unplug the connection wire from the device.
11. The therapy is over.

Carry out the above procedures 1, 2 or 3 times every day. The recommended duration of the treatment course is individual and depends on the quantity of procedures per day.

• In case you use the device 1 time a day, the course should last 40-45 days.
• In case you use the device 2 times a day, the course should last 30-35 days.
• In case you use the device 3 times a day, the course should last 20-25 days.

Exogenous and anti-parasitic bio-resonance therapy:

1. Put the device on the left wrist and the elastic support strap for power elements - on the right one, over vascular bundle (fascicle), on the pulse. The electrodes should be adjusted comparatively tight. If necessary, adjust the length of the straps.
2. Using the buttons "movement" (3) and "selection" (4), enter the program number (in conformity with the attached organs and diseases table). The apparatus, controlled by a microprocessor, will emit a signal of corresponding frequency, selected sequence and necessary duration.
3. Press the start button (1), and turn the device on. The display will show a moving point at the bottom of the indicator, which corresponds to the beginning of the treatment process.
4. After some time, in conformity with the set treatment program, the generation of the treatment signal will stop, the display will show figures, and there will be an audible signal. Turn the device off, unplugging the socket. Otherwise, in a minute, to save the battery life, there will be a signal, reminding to disable the device.
5. Remove the device and the elastic support strap from your wrist (if necessary).
6. Take a break for 20 minutes.
7. After the break, turn the device on again, and follow entries 1-4. The second cycle will start. After the second cycle is over, follow entry 6.
8. Make the second break for 20 minutes.
9. Turn the device on, and follow entries 1-4. The third cycle will start. After the third cycle is over, follow entry 6.
10. Unplug the connection wire from the device.
11. The therapy is over.

Carry out the above procedures 1, 2 or 3 times every day. The recommended duration of the treatment course is individual and depends on the quantity of procedures per day.

• In case you use the device 1 time a day, the course should last 40-45 days.
• In case you use the device 2 times a day, the course should last 30-35 days.
• In case you use the device 3 times a day, the course should last 20-25 days.

Universal anti-parasitic program:

1. Put the device on the left wrist and the elastic support strap for power elements - on the right one, over vascular bundle (fascicle), on the pulse. The electrodes should be adjusted comparatively tight. If necessary, adjust the length of the straps.
2. Using the buttons "movement" (3) and "selection" (4), enter number 4000.
3. Press the start button (1). The display will show a moving stripe at the bottom of the indicator, which corresponds to the beginning of the treatment process (the treatment signal is generated 7 minutes).
4. When the generation of the treatment signal will stop, the display will show number 4000, and there will be an audible signal, turn the device off.
5. Remove the device and the elastic support strap from your wrist (if necessary).
6. Take a break for 20 minutes.
7. After the break, turn the device on again, and follow entries 1-4. The second cycle will start. After the second cycle is over, follow entry 6.
8. Make the second break for 20 minutes.
9. Turn the device on, and following entries 1-4. The third cycle will start. After the cycle is over, follow entry 6.
10. Unplug the connection wire from the device.
11. The therapy is over.

Carry out the above procedures 1, 2 or 3 times every day. The recommended duration of the treatment course is individual and depends on the quantity of procedures per day.

• In case you use the device 1 time a day, the course should last 40-45 days.
• In case you use the device 2 times a day, the course should last 30-35 days.
• In case you use the device 3 times a day, the course should last 20-25 days.

Regime of manual frequency setting (based on your physician's recommendation or the diagnostics results)

This regime allows for carrying out the procedure of so called "wavelike seesaw".

To carry out the procedure, it is necessary to insert the starting and the final frequencies as well as the time, during which the scanning of the inserted frequency diapason is made.

The scanning diapason is from 0.1 Hz до 999.9 Hz.

The time of procedure is from 1 sec. to 9999 sec. (2 hours, 46 min., 39 sec.)

The scanning pace is calculated by a microprocessor, according to a formulae dF = (F starting – F final)/T, where dF – is a scanning pace, F starting – is the starting frequency, and F final – is the final frequency).

Example 1

Starting frequency – 10.0 Hz, final frequency – 100.0 Hz, scanning time – 300 sec. In this case, the scanning pace will constitute (according to the above formula) 0.3 Hz. Thus, after the start up procedure, the electrode output signal will be of 10.0 Hz, in 1 sec. – of 10.3 Hz, in 2 sec. – 10.6 Hz etc., and up to 100 Hz on the 300th sec.

Example 2

Starting frequency – 300.0 Hz, final frequency – 50.0 Hz, scanning time – 250 sec. In this case, the scanning pace will constitute (according to the above formula) minus -1 Hz. Thus, after the start up procedure, the electrode output signal will be of 300.0 Hz, in 1 sec. – of 299 Hz, in 2 sec. – 298 Hz, etc., and up to 50 Hz on the 250th sec.

Example 3

Starting frequency – 65.0 Hz, final frequency – 65.0 Hz, scanning time – 150 сек. In this case, the scanning pace will constitute (according to the above formula) 0 Гц. Thus, after the start up procedure, the electrode output signal will be of 65.0 Hz during 150 sec.

1. Put the device on the left wrist and the elastic support strap for power elements - on the right one, over vascular bundle (fascicle), on the pulse. The electrodes should be adjusted comparatively tight. If necessary, adjust the length of the straps.
2. Using the buttons "movement" (3) and "selection" (4), enter number 3000.
3. Press the START button. The display will show Ini.P symbols, and in 1.5 sec – four zeros, with a comma (000.0). It is necessary to enter the starting frequency.
4. Using the buttons "movement" (3) and "selection" (4), insert the value of the starting frequency.
5. Press the START button. The display will show End.P symbols, and in 1.5 sec – four zeros, with a comma (000.0). It is necessary to insert the final frequency.
6. Using the buttons "movement" (3) and "selection" (4), enter the final frequency.
7. Press the START button. The display will show TimE symbols, and in 1.5 sec – four zeros (0000). It is necessary to enter the time of procedure.
8. Using the buttons "movement" (3) and "selection" (4), insert the value of the time of procedure.
   ATTENTION! If you committed a mistake when inserting data for entries 3-8, press the STOP button, and go directly to entry 3!
9. Press the START button. The device will start to carry out the treatment procedure.
10. When the treatment procedure is over, the display will show figure 3000, and an audible signal will inform to unplug the socket.
11. Remove the device and the elastic support strap from your wrist (if necessary).
12. Take a break for 20 minutes.
13. After the break, turn the device on again, and follow entries 1-8. The second cycle will start.
14. Make the second break for 20 minutes.
15. Turn the device on, following entries 1-8. The third cycle will start.
16. Unplug the connection wire from the device.
17. The therapy is over.

Regime of programs' insertion into the memory:

To facilitate unfolding of procedures, there is a possibility to insert into the memory of the device the selected numbers of the programs, for them to be automatically performed.

You may select all the necessary programs, and insert an individual treatment program for yourself.

Let's say, you need to carry out treatment procedures, using numbers/figures 0000, 0200, 1030, 0012 etc. (there could be any numbers/figures within the interval fro 0000 to 1049), with 20 min. breaks between them.

For this purpose, it is enough to insert into the device's memory the program numbers in the necessary sequence, and start the program in the most convenient time. The rest the device will do itself, i.e. it will perform the first program, inserted into the memory, and then, there will be a 20 min. break, followed by the second program etc. until the last program, inserted into the memory, is performed. It is possible to insert up to 256 programs (256 memory cells), with 20 min. breaks in between.

The memory data are stored even if the device is turned off. There is a possibility to delete the program memory. Please, see below the procedure of programs insertion into the memory:

1. Turn BIO-MAG (Biomedis) on and insert number/figure 5000.
2. Press the START button.
3. The display will show the inscription PrOG.
4. If the device's memory cell does not contain an inscribed program, then the display will show stripes in its central part. Afterwards, in 1.5 seconds, the display will show four zeros (0000).
5. Insert the program number/figure, using the respective buttons. If the device's memory contains a certain inscribed program, then the display will show its number. You will be able either to correct it, or to leave it as it is.
6. Press the START button. The selected program number will be inserted into the memory. If the program number exceeds 1049, the display will show symbols Err, and there will be a transfer to entry 2.
7. Insert the number of the next program (if necessary), according to entries 4-6.
8. After you inserted the number of the last program and pressed the START button, it is necessary to leave the programming regime by pressing the STOP button.

ATTENTION! If you committed a mistake when inserting data for entries 4-6, press the STOP button, and go directly to entry 3!

To start an individual program or a set of programs, inserted into the memory, it is necessary to select number/figure 6000, and press the START button.

The program will be performed automatically. In this case, at the beginning of each program, the number/figure of the performed program will be shown on the display.

It is necessary to take into account the fact that if you turn the device off (unplug the socket), the performance of the individual program will stop. It means that during the breaks between the programs the contact socket should be connected.

To clear the program memory, select number/figure 7000 on the display and press the START button.

Recommendations.

1. Try not to perform hard physical work the day you carry out the treatment procedures.
2. Regardless the time you use BIO-MAG (Biomedis), try to drink 1-3 liters of clean and unboiled potable water (preferably reverse osmosis water). We recommend you to use no less than 30 ml of water per 1 kg of your body weight.
3. If you have any digestion problems (diarrhea or constipation), you should take strengthening or laxative bio-active substances, tea and products, containing lacto-bifida bacteria, following your physician's advise.
4. In case of acute conditions (poisoning, ARD, ARVI, flu) you should repeat the treatment procedure every 2 hours, until you feel better and the symptoms are gone.
5. You could use BIO-MAG (Biomedis) along with drugs and traditional medicine, increasing the overall effect of the latter.
6. Due to the low voltage at the electrodes, you, practically, do not feel anything during the procedures, just a little tingling. In order to increase the effectiveness, you should place cosmetic cotton disks, soaked with water, under the electrodes.
7. If you damage the skin under the electrode contact, we advise you to use cotton disks soaked with water.
8. During the treatment session, it is not recommended to cross the wires; the arms and legs should be parallel.
9. During the treatment session, although the arms are free, it is recommended to stay calm and set yourself to recovery.
10. You select the necessary quantity of procedures per day, depending on your individual susceptibility.
11. During post-vaccination period, you should use the device only after physician's consultation.
12. If you have a disease that carries a serious risk to your health, use the device only after the physician's supervision.
13. Upon completion of all the treatment procedures/sessions, the electrodes on the apparatus and wristlet should be cleaned with spirits.

Security measures guidelines

1. The device is produced in compliance with the requirements to products with internal power source, according to the Russian State Standards GOST R502 67.0-92 – "Protection against electrocution".
2. The plug and socket of the BIO-MAG (Biomedis) apparatus shouldn't get in contact with water.
3. In case you detect any problems, associated with the apparatus, immediately turn it off. Do not use the device with clearly visible damages (ragged wire, broken case).
4. Do not place the apparatus next to sources of open fire.
5. Do not leave the apparatus under direct sunlight for a long time.
6. Keep the apparatus out of reach of children.
7. Do not use the apparatus in the bathrooms and wet areas.
8. It is allowed to use the apparatus on children only under adults' supervision.
9. Do not place the apparatus inside the microwave ovens.
10. Do not disassemble the apparatus.
11. Do not place the apparatus under the water.

Technical specifications.

The apparatus contains a set of all necessary electrodes and connection wires. The apparatus is battery-powered, in conformity with security measures guidelines, applicable to medical equipment.

Warranties

1. The manufacturer ensures the compliance of the apparatus with the technical specifications set forth above, provided that the storage, transportation, and operation conditions are observed.
2. The operation warranty is one year from the date of procurement or date of receipt through airmail.
3. In case mechanical defects of BIO-MAG (Biomedis) apparatus' parts are found through no fault of the user, it is possible to replace either the apparatus, or its component parts.
4. The warranty does not apply to the apparatus, containing significant mechanical and/or chemical damage signs that deter the structural integrity of the device.