Bioresonance Therapy, Bioresonance Treatment, Buy Bioresonance Device, Bioresonance Machine, Alternative Therapy, Alternative Medicine, Health Therapy, Biomagnetic Therapy, Beauty Therapy, Beauty Treatment, Mora Therapy Device, Biomag, Bio Mag, Bio-Mag

1. - START button (to activate the device / to start the program)
2. - STOP button (to turn off the program / to turn off the device)
3. - Button to change indicator’s scale (“movement” button)
4. - Button to change figures in a scale (“change” button)

Preparations for use

1. To test the device, turn it on. To turn on press the button (1) on the left (the indicator should be turned to you).
2. Plug the device.
3. The device is ready.
4. If the device does not start, it requires recharging; connect the charger to the contact socket on the device's body (the charging takes 6 hours).
5. When the critical level of discharge is reached, the unit produces peak sound, and it should be charged.

Steps to follow when using Bio-Mag (Biomedis) for bioresonance therapy

For exogenous and anti-parasitic therapy:

1. Put the device on the left wrist and an elastic strap on the right one. The strap should be over vascular fascicle on the pulse. The electrodes should be comparatively tight.
2. Press button (1), and turn the device on. The display lights up, figures are shown, the device is ready for work.
3. Using the buttons "movement" (3) and "change" (4) you can enter the program (see the table to choose the disease, each number corresponds to the respective disease; you have to enter the number in order to choose the appropriate program for the disease you selected). The apparatus, controlled by a microprocessor, will give a corresponding signal. The signal has the required frequency and will last a certain period of time.
4. Press Start (1). (The indicator shows the running point at the bottom. The point corresponds to the beginning of the treatment).
5. After the generated signal stops (you see figures displayed at the indicator), the audible signal informs you that the program is over. Disable the device, pressing button (2). That will switch off the apparatus automatically.
6. Remove the device and strap from your wrist.
7. Take a break for 20 minutes.
8. After the break, turn the device on again (read points 1 and 4). The second cycle starts. After this cycle is over follow point 6.
9. Make another pause for 20 minutes.
10. Activate BIO-MAG (Biomedis), use points 1 and 4. The third cycle starts. After the third cycle is over, perform point 6.
11. Disconnect the device.
12. The therapy is over.

Repeat the above procedures 1, 2 or 3 times every day. Course duration is optional. The recommended duration depends on the quantity of procedures per day.

• In case you use the device 1 time a day, the course should last 40-45 days.
• In case you use the device 2 times a day, the course should last 30-35 days.
• In case you use the device 3 times a day, the course should last 20-25 days.

For endogenous therapy:

1. Put the device on the left wrist and an elastic strap on the right one.
2. The strap should be over vascular fascicle on the pulse. The electrodes should be comparatively tight.
3. Press button (1), and turn the device on. The display lights up, figures are shown, the device is ready for work
4. Using the buttons "movement" (3) and "change" (4), choose the number 2000.
5. Press Start (1). (The indicator shows the running point at the bottom. The point corresponds to the beginning of the treatment).
6. When the cycle is over (the display shows 2000), the audible signal informs you that the program is finished. Disable the device, using button (2), or it will switch off automatically.
7. Remove the device and strap from your wrist.
8. Take a break for 20 minutes.
9. After the break turn the device on again following points 1 and 4. The second cycle begins. After the second cycle is over, follow point 6.
10. Make a second break for 20 minutes.
11. Activate BIO-MAG (Biomedis), use points 1 and 4. The third cycle starts. After the third cycle is over, perform point 6.
12. Disconnect the device.
13. This procedure is completed.
14. Repeat the procedures 1, 2 or 3 times every day. Course duration is optional. The recommended duration depends on the number of your daily procedures.

Setting the frequency manually.

The frequency (from 0 to 999.9 Hz) is entered manually based on the diagnostics results or the doctor’s recommendations.

1. Put the device on the left wrist and the elastic thong on the right over the pulsating vascular nodes. The electrodes should stay relatively tight but not too much.
2. Turn on the power pushing the electronic button on the control panel of the device. The lighting up of the light-emitting diodes on the device’s display means that it is ready for use.
3. Using the buttons of shifting positions and numbers enter the value of 3000.
4. Push the "Start" button, after that the value of 000.0 will be displayed.
5. Using the buttons of shifting positions and numbers enter the curing frequency.
6. Push the "Start" button, after that in the top side of the display will appear a running point, which denotes the beginning of the curing process.
7. In 5 minutes, after the generation of the curing signal has stopped, the display will be indicating value of 0000 accompanied by a sound signal, disconnect the device or it will switch-off automatically.
8. Take off the device and the thong from your wrists.
9. Make a break for 20 minutes.
10. After the break turn on the device repeating steps 1 and 4, the second cycle of the therapy will begin. After the automatic switching-off of the device execute step 8.
11. Make the second break for 20 minutes.
12. After the break turn on the device repeating steps 1 and 4, the Third cycle of the therapy will begin. After the automatic switching-off of the device execute step 8.
13. Disconnect the wire from the device.
14. The procedure can be considered finished.

Recommendations.

1. Try not to do hard physical work the day you do the procedures.
2. Regardless the time you use BIO-MAG (Biomedis) try to drink 1-3 liters of clean drinking unboiled reverse osmosis water. We recommend you to use no less than 30 ml of water per 1 kg of your body weight.
3. If you have alimentary canal problems (diarrhea or constipation) you should take strengthen or stimulating drugs, teas, products containing lacto-bifida bacteria, following your doctor advice.
4. It is recommended (in case of acute diseases (poisoning, ARD, ARVI, influenza) ) to do the procedure every 2 hours till you start feeling better and all symptoms are gone.
5. You can use BIO-MAG (Biomedis) along with drugs and traditional medicine. This combination only makes it more effective.
6. Due to the low voltage at the electrodes you do not feel anything during the procedures, just a little tingling. In order to increase the effectiveness you should place cotton disks, soaked with water, under the electrodes cosmetic.
7. If you damage skin with an electrode contact we advise you to use cotton disks soaked with water.
8. It is not recommended to cross the wires, arms and legs should be parallel.
9. It is recommended to stay calm and set yourself to the recovery.
10. The number of procedures per day depends on your individual susceptibility.
11. After vaccination the device should be used only after physician’s consultation.
12. If you have a disease that carries a serious risk to your health the use of the device should be under the physician's supervision.

The reference to security measures.

1. The device is produced in accordance with the requirements for domestic power source products with GOST R502 67.0-92.
2. It is not desirable the water to get directly to the socket and plug of the device.
3. In case of problems immediately turn it off. Do not use the device with clearly visible damages (ragged wire, broken case).
4. Do not place the device next to the open source fire.
5. Do not leave the device in direct sunlight for a long time.
6. Keep the device off children.
7. Do not use the device in the bathrooms and wet areas.
8. It is allowed to use the use on children only under the adult’s supervision.
9. Do not place the unit inside the microwave ovens.
10. Do not disassemble the apparatus.
11. Do not place the unit under the water.

Specifications.

Warranty.

1. The manufacturer ensures the device quality if all storage, transportation and exploitation conditions are observed.
2. Lifetime warranty - one year from the date of purchase.
3. If any mechanical defects occurred through no fault of the user it can be replaced.
4. The warranty does not apply to the device with significant mechanical and chemical damage signs, damaging the structural integrity of the device.
5. The warranty period is calculated from the date of purchase or the receipt date by mail.